imported>Chris: /* Specifications */

2013-01-09T14:56:29Z

Specifications

New page

{{recommended reading|FCC Notice|}}
See [[Channels]] for more information about Standard and ControlTL frequencies and channels.

====Specifications====

{| border="1" class="wikitable"
|-
|'''TTL Compatibility'''
|Nikon i-TTL '''OR''' Canon E-TTL II
|-
|'''Frequency'''
|US FCC/IC ''340.00 - 354.00MHz'' CE - ''433.42 - 434.42 MHz''
|-
|'''[[Channels]]'''
|US FCC/IC - ''52 Channels over 26 Frequencies'' CE - ''35 Channels over 5 Frequencies''
|-
|'''Antenna'''
|MiniTT1 - internal FlexTT5 - 2.7" (6.9 cm) rubberized with 180 degree swing
|-
|'''Transmit Output Power'''
|Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
|-
|'''[[Long_Range_Performance|Range Performance]]'''
|Up to 800 feet (10 to 240 meters) for ControlTL triggering depending on flash used, antenna orientation and other variables. Up to 1200 feet (10 to 365 meters) for [[Misc_Tab#Basic_Trigger| basic triggering]] depending on flash used, antenna orientation and other variables.
|-
|'''Mounting'''
|Hot Shoe, 1/4-20 thread mount, lanyard, velcro
|-
|'''Maximum Shooting Rate'''
|TTL Mode: within 1 FPS of camera's maximum frames per second (FPS) Basic Trigger Mode: Camera Max FPS dependent on flash power settings
|-
|'''Power/Channel Switch'''
|OFF - C.2 - C.1
|-
|'''Zone Select Switch'''
|A-B-C (matches Canon/Nikon zones)
|-
|'''Status Indicator'''
|LED: Green, Amber, Red status indications
|-
|'''[[Batteries|Power]]'''
|MiniTT1: 3 V Lithium battery, CR2450 (included)
FlexTT5: Two (2) AA (IEC:LR6) batteries; Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed
|-
|'''Camera / P1 Port '''
|1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous Tip = Trigger Ring = Pre-Trigger Sleeve = Ground [[Note:]] This port is output only.
|-
|'''Flash / P2 Port '''
|1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized [[Note:]] This port is output only.
|-
|'''Minimum Receive Contact Time'''
|Camera / P1 Port = 80 milliseconds Flash / P2 Port = 500us
|-
|'''Voltage Present'''
|3.3 VDC (all pins) - safe for all cameras
|-
|'''Voltage protection'''
|Hot Shoe - Up to 50V P2 Port - Up to 200V
|-
|'''Operating Temperature'''
|Above -15° C (5° F) and below 50° C (120° F).
|-
|'''Storage Temperature (without battery)'''
|Above -30 C (-22 F) and below 85 C (185 F)
|-
|'''Construction'''
|High impact plastic, captive battery door Hot Shoe made of glass reinforced resin ''RoHS Compliant''
|-
|'''[[Batteries|Battery Life]]'''
|Canon MiniTT1 - Hundreds of hours of camera "awake time" depending on shooting habits 
Nikon MiniTT1 - 30 - 50 hours of camera "awake time" depending on shooting habits 
FlexTT5 - 60 + Hours
|-
|'''Dimensions'''
|MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery FlexTT5 - 3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered
|-
|'''Weight'''
|MiniTT1 - 2.3 oz (65 grams), 2.0 oz (57 grams) without battery FlexTT5 - 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries
|-
|'''Included in the box '''
|MiniTT1 - MiniTT1 Transmitter, USB cable, One (1) CR2450 battery, Quick Guide FlexTT5 - FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide
|}

MiniTT1 and FlexTT5 Specifications - Revision history

imported>Chris: /* Specifications */